Responsive Colour Selection

Principles of design practice for stained glass, 2

The graphic form of much stained glass means that the medium is about line and colour. This requires that you think about both your and the viewer's response to the colour combinations. Respond to your instincts. Use you feelings about colour and their relationships. Try different colour ways. Formal training does help, but experience develops your skills. The individuality of the piece depends on the use of your instincts about the colour. There are some checks you can make while selecting colours.

Think of colour and impact. Hot colours tend to have more impact, as they give bright points or areas. Impact can also be created by using non-complementary colours together. If a more subtle impression is desired, use tonal variations without great contrasts.

Vary areas of colour and their proportions. This provides interest to a panel. It avoids a mechanical symmetrical appearance, even if the design is symmetrical

Think about colour balance. Although the colours may vary it is important that the weights of the colours are balanced so that the focus of the panel is not taken to another part because of the imbalance of the colour with the design.

When you are in difficulty selecting or arranging the colour, step back and view from a distance. This is one of several techniques to enable you to get a larger or different view. Others include viewing the design through a mirror, viewing through half closed eyes, look at the design from the other end, and viewing the design from acute angles.

When something feels wrong, trust your intuition and use other colours. Colour theory is just that -theory. It is through using your reactions that the piece becomes individual.

Seek out the nuances of the glass in tones and textures. These alter the perceived colour and weight considerably.

Keep the design lines simple when your emphasis is on colour, light and texture. This allows those qualities to dominate the panel, rather than the lines.

Always make a coloured drawing, before choosing the glass, as a reference. This is a rendering of your original idea. It provides a reference as you select the colours. It is something that can be altered, of course, but does provide an essential reference point.

Choose glass colours in the kind of light for which the panel is intended. This is essential, as the glass colour is subtly different in daylight, incandescent, and fluorescent lights.

Elements of Design:

Designing for strength 

Colour selection

Design lines 

Design sources 

Reworking designs 

Pattern Cutters

These are really only needed when the glass is so dark that a light table does not transmit sufficient light through the glass to see the cartoon lines. An alternative is to cut at the side of the cartoon lines, leaving the appropriate sized pattern piece.

Pattern shears
Pattern shears are specially designed three-bladed scissors that are used to cut out patterns. The middle blade cuts out the allowance for the heart of the lead came or copper foil. Different shears are available for lead or foil work. The allowance for lead came is usually 1.5mm; foil allowance is 0.75mm.

Pattern Knife
Knives with two parallel blades properly spaced for the lead came or foil allowance are also available for pattern cutting. These are ideal for tight curves, as they are easier to manipulate than shears.

Cartooning for Acute Angles

When you are designing panels, you can prevent some leading difficulties. If you have shapes that join at acute angles, you can alter the design to make the leading simpler.

Say you have two balls touching. You can design the panel so the cut lines intersect or touch each other. This makes for extremely acute angles in the cutting of the cames. Two balls touching in the presentation drawing will not look the same if leaded that way.  So if you make the edges of the balls just a few millimetres separate, the cames will pass each other, just touching, and so have the appearance of the presentation drawing, rather than the appearance of overlapping.

You separate the lines by the thickness of the came you will be using for that area. If you are using 6mm came, the cut lines should be just less than that distance apart. This will allow the cames to go around each shape and the flanges of the came will just overlap. This makes for quick leading and a clean appearance.

Lampshade Pattern/Cartoon Tools

Lampshade patterns –tools for custom-made patterns.

The items you need to have for creating your own pattern are not extensive or unusual.

• Craft knife or razor blade
• Baby/talcum powder
• Fine pointed felt tipped pen (Sharpie)
• Highlighting pen
• Pencil
• Eraser
• Carbon paper
• Drawing paper
  Masking tape
• Lampshade form
• End/vase cap
  

Further design process information is here and here

Lamp Panel Dimensions

Lengths of Panels

Lampshade Pattern Construction, 3

Cut the finished template into sections (if you are using a 360 degree form)
The masking tape template will need to be cut off the curved form and laid out flat. This is easier to do if you can logically separate the template into smaller sections. To do this you need to find lines running almost vertically from the top to bottom of the template. Mark these separation lines in a different colour. Also label each section.

Remove the template(s) from the form and press it out flat
Take a craft knife or razor blade and trim away excess masking tape from the end cap mark. Do the same for the bottom edge. Carefully remove the excess and throw it away.

Prepare a section of your work surface by sprinkling some talcum powder on it, and onto your hands as well. This will help keep the sticky side of the masking tape from sticking where you don't want it later.

Using the craft knife, slice through the middle of each separation line that you marked in a special colour. Try to stay in the exact middle of the line. Be careful that you do not tear or cause to pull away the underlying masking tape as you cut through the line. Do this with each separation line.

Starting with the top edge, use the craft knife to gently pull the masking tape template off the form. If the masking tape starts to separate, stop and repair it. As each section is taken off the form, put it sticky side down into the talcum powder and press it flat. Do this for each section.

Scan/copy the template(s)
At this stage you can scan each section into Glass Eye or other image software. This allows you to:

• select and change colour/glass choices very easily
• print out or email colour proofs to the client
• keep them in an electronic form for future reference or manipulation

You don't have to scan your pattern, but you do need to make at least two copies of the pattern.

Cut out one copy and reapply it back to the form
One copy is fastened back onto the form so that you know where to put your glass pieces.

Cut out the other copy and paste it onto your glass
The other copy is cut out using pattern shears (the three-bladed scissors) and glued onto the glass for cutting.


Based on work by Christie A. Wood, Art Glass Ensembles

Lampshade Pattern Construction, 2

The second stage is to get the design onto the prepared mould and make adjustments to give a balanced and pleasing appearance

Trace the pattern onto the template
Take your design elements and trace them onto the masking tape on the form. The use of carbon paper enables you to put the design element and trace right on top of the taped mould so that the image is transferred onto the tape.

An alternative method is to use a pounce wheel to perforate the design element. The element is placed on the form and dusted along the perforated line with a bag of dark coloured powder such as powdered poster paint. This will leave a temporary trace on the form that can be changed easily, but needs to be pencilled in before too much other work smudges the shape.

Do this tracing with each design element, flipping and rotating them around so that you don't repeat any element exactly. Fill up major sections of the form using this method. Drawing the main feature first and filling with the minor elements helps provide a pleasing composition.

Fill in blank areas
Now that the key design elements are onto the masking tape template, create background pieces by linking your design elements. Use pencil, since you will probably need to do corrections. Remember, avoid creating large horizontal pieces. Larger vertical pieces are usually better. However, try to keep all the pieces of similar size.

Correct any pieces and number them
Once you are satisfied with the design, go over every line with a fine felt tip pen or other ink pen so that each is clear and distinct. Number each piece and mark colour and glass textures as necessary.


Based on work by Christie A. Wood, Art Glass Ensembles