When
making frit in steel containers the metal fragments need to be
removed using magnets. It can be very difficult to get the fragments
off the magnets.
A
solution has been suggested. Put the magnet into a small plastic bag
before use. After cleaning all the metal from the frit, take the bag
to the bin and remove it from the bag. The metal fragments will drop
off into the waste bin, leaving a clean magnet.
This is the best advice ever. I hate trying to get that stuff off the magnets. I never would have thought of it myself. Thanks!
ReplyDeleteAs noted above, this (as many other suggestions are) was passed on to me by others. I'm glad it is of use.
ReplyDelete