The placing of glues to hold the glass pieces temporarily
is important. Often unsightly black
marks appear due to inappropriately placed glues. Bubbles can form between layers and even appear to come from underneath the
glass for the same reason. Placing is
often more important than the amount of glue used. Still, the amount used should be the minimum
to hold the glass from moving from bench to kiln.
Place glues at edges of the pieces to be secured during
movement. This allows the burn-off of
the glue to evaporate without being trapped under the glass. If you use very runny or diluted glues, the
capillary action will draw the required amount of glue under the glass piece to
form a secure adhesion.
Glues burn off and leave the glass pieces unsecured long
before the glass becomes tacky enough to stick together. This means that if your stack of glass will
not stay in place without glue as you build it, the glass will collapse or move
in the kiln. Glues are only suitable to
stabilise the glass pieces while moving to the kiln.
Two recommended glues that burn off cleanly are the Bullseye Glasstac (more fluid) and the Glasstac gel (more viscous)
No comments:
Post a Comment