Sunday, 13 February 2011

Getting Water to the Mini Work Surface of a Glastar G8

Sometimes the water does not rise to the mini work surface. There are a number of things to check. These, in order, are usually the reasons the water does not get to the Mini Work Surface.

• Ensure there is enough water in reservoir, right up to the overflow

• Ensure channel from impeller to the up tube is clear

• Ensure the up tube is clear

• Ensure tap at the top is clear

• Flush the feed lines with a syringe or bulb instrument

• look at the position of the impeller on the shaft. It can move up or down. Repositioning it can improve the flow of water to the top story.