Keeping Copper Inclusions from Oxidising

The colour change in the copper foil is due to oxidisation - if the copper foil is completely deprived of oxygen it stays shiny and copper coloured. If you leave copper exposed at all it will go metallic blue or even bottle green, mostly it turns a lovely burgundy red colour- an intermediate oxidisation stage.

Klyr fire or borax solutions may help the copper stay bright.

Through doing some experiments with art school students, I have found the speed of firing is critical in an electric kiln. In a gas kiln the speed is normally fast anyway and produces better results than an electric kiln. It also is a kiln with a reducing atmosphere rather than oxidising one of an electric kiln.

Summary:

The main elements in keeping copper inclusions (and by extension, other metals) bright is to keep the metal from oxidising. Two elements are important in this:

• Keep oxygen from the metal
• Reduce the time the metal is exposed to high temperatures

Various methods are used to keep the metal from exposure to oxygen. Some of these involve: 

• coating the metal with fluxes to reduce the amount of oxygen in contact with the metal. 
• using a reducing atmosphere, such as a gas kiln. 
• placing an oxygen hungry material in the kiln with the glass and metal. 
• coating the metal with glass powder before encasing it within the glass.

Reducing the heat exposure of the metal also indicates that firing fast would provide better results. This requires very even heating within the kiln to avoid heat shocking the glass.  This is where a gas kiln is most advantageous - it can be fired fast without breaking the glass and it has a reducing atmosphere within it.

In general, it is easier to make use of the effects of the oxidised metal rather than striving for bright metal inclusions.

Gas Fired Kilns

Installing a Gas Fired Kiln

There are a number of considerations about the location of a gas kiln.

Air exchange

The kiln should be placed in an area where there is good air exchange. For a number of reasons, it is usually convenient to place the kiln near an outside wall – ventilation and canister storage are the two most important.

Ventilation

There should be a low level vent to the outside to allow air to rise for the use of the combusting gas. There needs to be high level vent for the gas to escape. Ideally a hood with powered extraction would be installed.

Space

As with any kiln, you need to have sufficient space around the kiln to avoid heating any flammable materials. In the case of a gas kiln you need to be careful to avoid storing any thing that might ignite above the kiln. You can put heat resistant materials around the kiln if desired.

Location and storage of gas canisters

The safest place to put the gas canisters is outside the building. This does mean going outside to turn the valve on the gas canister on and off. However this is the safest place, should any fire start in the building, because the fire brigade can find and remove it from the fire. This placing applies to both the in use canister and any other full or empty canisters.

Detectors

Finally, even with these precautions, you should install a carbon monoxide detector. Carbon monoxide has no smell and can overcome you very quickly. Even a few minutes of exposure can leave you feeling ill for days.