Soak

Kilnformers seem keen to reinvent terminology and then wonder about imprecise language being used in the field. Much of the terminology for kilnforming is already available from ceramics. It makes sense to continue to use that terminology where it applies.

A soak at a stated temperature is the same as "hold" at the same temperature.

The concept of soak is more useful than the term “hold”.  “Soak” implies the temperature is held at temperature to allow the heat to soak into the glass. And that is the purpose of a hold.  Using the term “soak” brings this purpose into the thinking about scheduling.  It is related to the concept of heat work. 

Using the concept of heat work allows you to use a slow rise to a temperature for a short time to get the effect you want.  Or to rise to a temperature in the normal way but with a long soak.

This is how you can get a tack fuse at 750C with a long soak – say 30 mins - as at higher temperature for a shorter soak – say 780C for 5 minutes. This the concept of heat work in practice.

Further information is available in the e-book: Low Temperature Kilnforming.