Glass Tips from Verrier

A flat lap is a horizontal spinning disk to grind and polish flat surfaces onto the fired glass piece. Many desire one of these but are p...

There are many aspects to drilling into glass.  This post reviews the major aspects. Keeping Things Wet When drilling glass it is important ...

“What size of tip should I get for copper foil?” The size of the tip is less important than the amount of solder applied. I can use my 200...

  Top pliers are used but undamaged.  The bottom pliers have rounded tips and will not grasp thin pieces of glass anymore. Narrow grozing pl...

Frequently there are chips on the bottom surface or breakouts at the end of cuts while sawing glass. There are several methods to reduce t...

If your scoring and breaking of your glass is not going well, you need to diagnose the reasons.  There are always a lot of suggestions th...

There are a number of types of cut running pliers.   These photos show some of them.  The apparently most popular is this: ...

  This post is about hand polishing edges, although the most common method seems to be a   fire polish .   But the other, less considered, m...