Glass Tips from Verrier

  The description The objective is a sculpture 50mm x 50mm x 90mm (2” x 2” x 3.5”) composed of two layer slabs to make it 90mm high. The ...

  image credit: Olympic kilns Is it acceptable to have kilns on wheels? A number of people have small studio spaces and do not have their ...

A light and uneven distribution of frit that provides a pleasing image. image credit: Donna Brown It is often difficult to get an even dist...

DreaminColoursArt How can veiling be reduced in heart casting moulds? These ways of avoiding or reducing the evidence of the cullet pieces...

Is any glue required to stabilise glass pieces in kilnforming? If so, the amount, placing and type are important. The more glue you use, t...

Despite not opening the kiln until it was 120 degrees, a ¾" crack formed in the middle of a 15" x 15" flat fused 1/4 ” slum...

Recommendations for a transparent sky blue apart from sky blue for a drop out so I need high saturation? Image credit: The Glass Hub ...

Why do schedules vary so widely? I frequently observe strange annealing schedules promoted on the internet. These include: extremely l...

Credit: Creative Glass Guild Can stringers be stabilised without glue? To stabilise a single or multiple stringers a few grains of powder ar...

How can sand pictures be produced in glass? This process provides flowing, abstract images that can be used as autonomous pieces or formed i...

What would happen if I tried ... in kilnforming? A lot of discussion on the internet seems to be a search for certainty in both stained gla...

Loctite Glass Glue This is best for small craft items, adhering glass to glass and glass to metal. It is a cyanoacrylate glue. Sui...

What can I make custom kilnforming moulds from? There are a wide variety of moulds available to purchase, but sometimes they are too expensi...