Glass Tips from Verrier

  Credit: Marcy Berman I have not had much success [with] the Patty Gray mould despite using the recommended firing schedule. I always hav...

  Let’s think about moisture and large bubbles from under the glass. It is not the water, but the gasses created by the decomposition of mat...

  Texture moulds are a form of bas relief in reverse. The texture of the mould is the bas relief. The glass formed over the shapes is in neg...

  Any suggestions on how to avoid getting the oblong bubble under the neck of the bottle? This was my first try and I’m really happy with cl...

An enquiry on incomplete definition in the glass from texture moulds: I have this texture mould, but I’m not getting much definition. I’m us...

Firing with cremation remains is very similar to firing with any organic material encapsulated into glass. Design There are several po...

"I could use some help here please. I’ve tried this sun mould 3x and as you can see all 3x I get a hole.  If you could tell me what...

Sometimes people doing dropouts get bubbles or unevenness on the rims of their pieces.   This means that it is not suitable to leave the...

Glass Stela Credit: Stephen Richard Fusing multiple layers is prone to the creation of multiple large bubbles.   It also needs a strategy to...

“My bubble squeeze temperature is higher than my slumping temperature.“  The writer goes on to say that their bubble squeeze is at 1250°F/67...

Pin holes in screen and pot melts are the result of very small bubbles rising to the surface.   These bubbles are sometimes within the...