Tuesday 4 February 2020

Breaking Apart the Last Two Thin Strips

For multiple thin strips of even widths, score all the strips first. Then break all the scored strips off the remaining sheet as one piece. Start the breaking process by breaking the scored sheet in the middle, then in the middle again, until there are only two to break apart.

Cut running pliers are most useful until the last two thin strips are to be divided.




At that point use two breaking pliers to hold each side of the two pieces of glass. The noses of the pliers should almost touch on either side of the score line. Apply pressure in a downward pivoting motion to break the pieces apart.

No comments:

Post a Comment